TRANS4LOOR METALLIC DECORATIVE EPOXY SYSTEM is a two-component, solvent free, 100% solids epoxy/amine system designed specifically for applications over concrete floors and countertops where maximum durability and chemical resistance are required within a decorative metallic system. The high gloss material is available in a solid color base coat, and a clear formula where metallic pigments* are added.
*Metallic pigments purchased separately
Step 1 – Black Base Coat provides an opaque black, 100% solids, high strength base coat – the ideal canvas for the most vibrant and eye-catching metallic effects.
FEATURES AND BENEFITS
- 1:1 mix ratio
- Solvent-free, low odor
- Acts as an adhesive to fill and strengthen around minor cracks, crevices and weak spots
- Easy to use roller application
- Available in 2-gallon and 10-gallon kits
- 2-gallon kit
- 10-gallon kit
DATA SHEET DOWNLOADS
Floors aren't the only hard surfaces that can be transformed using Trans4loor™ Metallic Epoxy. So are countertops, precast furniture and more!
TRANS4LOOR Metallic Black Base Coat is a 100% solids epoxy, with low odor and zero VOC's and serves as the perfect base for concrete surfaces where a smooth, glossy, attractive and highly durable metallic finish is required. The high performance, self-leveling characteristics generate the premier balance of strength, flexibility, and chemical resistance that is both user-friendly and extremely durable. It is ideally suited for any commercial or residential setting: manufacturing facilities, warehouses, bars, clubs, retail stores, automotive showrooms, residential interiors, garage floors, gyms, locker rooms, stadiums, or anywhere that an exceedingly resilient floor is desired.
- Retail and Commercial Flooring
- Garage Floors and Showrooms
- Restaurant and Kitchen Flooring
- Interior Residential Living Spaces
- Hotel and Resort Reception Areas
- High-Traffic Interior Applications
- Fast Turn-Around Projects
- Aircraft Hangar Floors
Question: Will Trans4loor Metallic Black Base Coat Epoxy fill small divots and minor cracks?
Answer: Yes, it certainly will! However, be sure not to try to bridge expansion joints as these are necessary to allow movement in the concrete.
Question: Can Trans4loor Metallic Black Base Coat Epoxy be used outside?
Answer: No, epoxy coatings are not vapor-permeable and therefore should not be utilized in exterior applications.
Question: I have strict VOC laws in my area, can I use Trans4loor Metallic Black Base Coat Epoxy?
Answer: Without question, yes! At zero grams per Liter of VOC content, Trans4loor Metallic Black Base Coat Epoxy can be used no matter how strict local VOC laws are!
|Coverage||100-150 square foot per gallon per coat catalyzed product (varies widely based on application method)|
|VOC Rating||< 20 g/L|
|Shelf Life||2 years in original unopened container|
|Mixing Ratio||1 parts A to 1 part B|
|Pot Life||10-20 minutes|
|Ready for recoat||6-8 hours (18+ hours at low temperatures)|
|Light Duty Use||Approx 16 hours (Up to 30 hours at low temperatures)|
|Heavy Traffic Ready||Approx 24 hours (Up to 3 days at low temperatures)|
|Full Cure||5-7 days (Up to 14 days at low temperatures)|
|Appearance (cured)||High gloss sheen|
|Appearance (wet)||Clear – Straw Color|
|Abrasion Resistance (Tabor)||80 mg (CS-17,000 cycles, 1000 g mass)|
|Shore D Hardness||65-70|
|Application Temperature||50 – 90 degrees Fahrenheit|
|Xylene||8 hours splash spill|
|Gasoline||2 hours splash spill|
|Butanol||8 hours splash spill|
|Ethyl Alcohol||8 hours splash spill|
|Skydrol||2 hours splash spill|
|10% Sodium Hydroxide||long term immersion|
|50% Sodium Hydroxide||2 hour immersion|
|Acetic Acid 5%||2 hours splash spill|
|10% Sulfuric Acid||8 hours splash spill|
|70% Sulfuric Acid||not recommended|
|10% Hydrochloric Acid||8 hours splash spill|
|20% Nitric Acid||not recommended|
|Ethylene Glycol||8 hours splash spill|
2-Gallon Kit Premium Decorative Epoxy Trans4loor™ Metallic, 10-Gallon Kit Premium Decorative Epoxy Trans4loor™ Metallic