澳洲10娱乐平台

SureCrete’s concrete surface delay is a film forming liquid that helps keep the cream finish of the surface of overlays or newly poured concrete surface moist for slowing the cure time.

DATA SHEET DOWNLOADS

 

澳洲10遗漏


Liquid Concrete Surface Delay by SureCrete

Liquid Concrete Surface Delay by SureCrete


SureCrete's concrete surface delay is a transparent, soapy odor, non-hazardous, concentrated, film-forming solution that is designed to retard the initial evaporation of water from new concrete or stamp overlay during finishing operations. Surface Delay is especially useful for conditions that include high wind, low humidity, high temperature or any combination. Concrete can be placed with a lower slump, even under rapid drying conditions, helping to reduce related shrinkage cracking or surface checking by slowing initial evaporation of bleed water.

When you need a little more time to work on a concrete stamping project, the concrete surface delay will help you do just that. Sometimes a custom carving design or an intricate stamping pattern is more difficult and time-consuming to accomplish, or possibly weather conditions are simply not behaving as expected. When this is the case, extra time may be necessary to complete a project. If you're a homeowner working with a stamp overlay product for the first time and need a bit more time to get your desired finished product done, just apply a little surface delay to the wet surface to keep your surface workable.


澳洲10玩法

  • Stamp Overlay
  • Fresh Poured Stamp Concrete
  • Concrete Wall Stamp Overlays
  • Carvable Overlay
  • Vertical Carving Cement
  • Vertical Stamping Mix

澳洲10开奖号码记录

Surface Delay is a very simple to use product:

  1. Dilute Surface Delay with 9 parts water to 1 part product.
  2. Place product in the traditional manner, and after surface has been leveled and before product has become too dry to carve or stamp, spray Surface Delay onto the surface evenly.
  3. Surface Delay can be re-applied between finishing operations under severe conditions.

 


澳洲10开奖号码

澳洲10开奖号码查询

Answer: After you've placed and leveled out the product, but before it has set up too far to be carved or stamped.

澳洲10开奖软件下载

Answer: Yes. It does not need to be removed once applied and should be worked into the surface as you finish.

澳洲10两期精准计划

Answer: Yes. The same principles apply to freshly poured ready-mix concrete as do stamp concrete applications.

澳洲10开奖官网

Coverage   200-400 square foot /gallon
VOC Rating   0 g/L
Shelf Life   1 year in original unopened container
Appearance   Milky, opaque color
Odor   Solvent

 

1 and 5 Gallon Stamp Concrete Surface Delay Film Forming Liquid Surface Delay™

Surface Delay™ 1 and 5 Gallon Stamp Concrete Surface Delay Film-Forming Liquid 1 Gallon SKU: 15102003 | UPC: 842467106716 5 Gallons SKU: 15102004 | UPC: 842467106723

 

澳洲10网上投注

Size

1 Gallon Concrete Surface Delay, 5 Gallons Concrete Surface Delay

澳洲10三期计划

There are no reviews yet.

Be the first to review “Stamp Concrete Surface Delay Film Forming Liquid Surface Delay™”

Your email address will not be published.