澳洲10五码计划两期

SureTex™ is a concrete knockdown overlay that has larger slightly larger aggregate than other overlays to help creates deeper textures and designs. SureTex is specially formulated for quicker dry time and can be applied with a trowel or sprayed with a hopper gun. This overlay is easy to mix, just add water and one of SureCrete’s standard 30 overlay colors.

DATA SHEET DOWNLOADS

澳洲10平台注册


Concrete Overlay KnockDown Mix SureTex by SureCrete

Concrete Overlay Knock Down Mix SureTex™ by SureCrete


SureTex™ is a cement-based concrete knockdown overlay for both interior and exterior concrete surfaces. It's slightly larger aggregate creates deeper textures, and its chemistry allows quicker surface drying than most overlay products. SureTex™ used with compressed air spray equipment (commonly a hopper gun), additionally designed for troweled from the simplest of knock-down to the most beautiful Euro-texture. Restoration, repair, resurfacing, architectural accenting, surface protection, and creating slip resistance of existing concrete are all realized through SureTex. It is seasonally user-friendly, available in Summer and Winter mixes.

SureTex™ shares many of the qualities of its sister product SureSpray and as such can be applied in a wide variety of applications. However, with a much larger aggregate size than it's sprayable sister product SureSpray™, SureTex lends itself to much more rich depths of texture and as such can be used to create a wide array of custom artistic designs. In the hands of professionally trained artisan contractors, SureTex™ can be manipulated to create any number of custom themed flooring surfaces. Since it is such an easy to work with a versatile product, it also lends itself to DIY homeowner usage as well.


澳洲10官方开奖查询

  • Residential Patterned Sidewalks
  • Home Driveways
  • Commercial Floor Coatings
  • Property Management Walkways
  • Pool Decks & Patios
  • Retail Flooring Locations
  • Floor Concrete Texture
  • "Slop Trowel" Texture Designs
  • "Wet Bubble" Textures
  • "Euro-Tile" Trowel Designs
  • Brick Tape Pattern
  • Faux Tile Designs
  • Custom Stencil Patterns
  • Concrete Resurfacing Texture

澳洲10开奖结果

SureTex™ has a broad range of application methods, here is the most common:

  1. Any surface receiving a cement-based coating must be clean, cured, sound and profiled. See our Surface Preparation products for more information on accomplishing this
  2. Make sure that temperatures will remain between 50 and 90 degrees Fahrenheit and there will be no precipitation in the applied areas for a 48 hour period following application.
  3. Add 4 - 6 quarts water per 50 lb bag to 5 gal bucket and mix in any color desired for integral coloring of SureTex™
  4. Slowly introduce mix while continuously mixing and mix for a minimum of 1 minute once all product is into a container. Scrape the sides of the bucket to make sure there are no "dry pockets" that didn't get mixed properly.
  5. Mist the surface of the concrete with water ahead of any areas about to receive mix.
  6. Pour a generous ribbon of SureTex and tightly trowel or squeegee product over the entire area.
  7. If you need a second coat of mix, only wait until the surface is properly cured - approx 2-6 hours. A second coat can be applied same as the first layer. Make sure to scrape away excess material from first coat before applying the finish.
  8. Once the surface has dried and cured sufficiently (approx 2-6 hours), it can accept stains and secondary colorants and is also ready to receive a sealer. Typical outdoor applications would utilize an acrylic sealer from our SureSeal line of products.

澳洲10怎么玩

澳洲10开奖结果大小

Not necessarily. It depends on completely upon the design you’re looking for and the substrate you’re working with.

澳洲10开奖视频

Depending on how SureTex’s first coating of the product was applied it may be thin enough that imperfections will likely “show through” in the first coat of the product, this would be a case where a second coat would likely be desired.

澳洲10分析

While it is a very user-specific design texture, it’s basic application method can be taught very easily. Check out our Design Ideas or Videos sections for some application ideas, or feel free to attend any of our local training sessions.

澳洲10全天计划单期

Coverage Approx 125 – 175 square foot per 50 lb bag (Varies based on substrate and application)
VOC Rating 0 g/L
Shelf Life 1 year in original unopened container
Mixing Ratio 4 – 6 quarts water per 50 lb bag
Base Color White
Curing Bases Summer & Winter Mix Designs
Density 126.1 lbs/cubic foot
Compressive Strength ASTM C-109: 4,269 PSI @ 28 days
Flexural Strength ASTM C-348: 980 PSI @ 28 days
Tensile Strength ASTM C-190: 440 PSI @ 28 days
Abrasion Resistance ASTM D-4060: less than 0.50% @ 28 days
Mosaic Shear ANSI A-118.4: 275 PSI @ 28 days

澳洲10开奖平台


SureTex™ is a concrete knockdown overlay that has larger slightly larger aggregate than other overlays to help creates deeper textures and designs. SureTex is specially formulated for quicker dry time and can be applied with a trowel or sprayed with a hopper gun. This overlay is easy to mix, just add water and one of SureCrete’s standard 30 overlay colors.

SureTex™ SKU: 25101010 | UPC: 842467102312

50 Lb. Texture Concrete Floor Overlay Slow Cure SureTex ST™ by SureCrete

SureTex ST™ Slow Cure SKU: 25101009 | UPC: 842467102305

澳洲10手机软件

Mix Type

50lb. SureTex™ Mix, 50lb. SureTex ST™ Mix

澳洲10历史记录

There are no reviews yet.

Be the first to review “Concrete Knockdown Overlay Mix For Making Thicker Textures SureTex™”

Your email address will not be published.