澳洲10开奖号码

SureCrete’s Dura-Kote DK 400WB™ water-based clear floor polyurethane top coat is available in either a gloss or satin finish. Formulated as a highly durable transparent flooring protective coating for interior commercial or residential applications with low VOC properties.

DATA SHEET DOWNLOADS

澳洲10技巧


Water-Based Clear Floor Polyurethane Top Coat DK400WB Gloss or Satin by SureCrete

Water-Based Clear Floor Polyurethane Top Coat DK400WB Gloss or Satin by SureCrete


Dura-Kote clear water-based floor polyurethane is a 2 component 57% solids, acrylic polyurethane designed as a non-yellowing clear coating for concrete, cement-based overlays, or as a top coat on epoxy systems. The commercial grade clear finish topcoat is available in gloss or satin finishes provides the durability of a solvent base system with the ease and safety of a low VOC (73 g/L) water base system. Unlike nearly all polyurethanes, Dura-Kote (DK) clear water based polyurethane has remarkable properties related to vapor permeability, which permits its use in specific exterior settings. Note: See paragraph 5 under surface prep. Generating the premier balance of strength, added UV stability, flexibility, chemical and scratch resistance, it is both user-friendly and extremely durable. As a vertical wall coating, it enhances anti-graffiti properties. Dura-Kote water-based polyurethane is ideally suited for both commercial and residential flooring: aircraft hangars, clean room floors, manufacturing facilities, warehouses, bars, clubs, retail stores, automotive showrooms, residential interiors, garage floors, stadiums, or any high traffic area where an exceedingly resilient floor is desired.

For interior coatings, especially in areas or environments in which you are looking for an eco-friendly coating, Dura-Kote DK 400WB can be an extremely effective sealer for your concrete projects. With a VOC rating that will allow it to be placed in 99 percent of all states and municipalities, SureCrete's polyurethane is an ideal coating for generating LEED points and earning green projects as a professional applicator. If you're a homeowner or DIY weekend warrior looking to do some work on your home but need to eliminate odor and lower the chemical vapor residue released by your particular project.


澳洲10遗漏

  • Eco-Friendly Commercial Kitchen Floors
  • Retail Floor Protection Green Projects
  • Low Odor Restaurant and Bar Floors
  • Non-Caustic Residential Living Areas
  • Eco-Friendly Interior Hotel and Resort Flooring
  • High-Traffic Interior Walkways Green Projects
  • Low Odor Auditorium and Stage Floors
  • Non-Caustic Residential and Hotel Bedroom Floors

澳洲10人工计划公式

Our Dura-Kote Polyurethane products are some of the easiest to apply and use:

  1. Any surface that is about to be sealed needs to be completely cured, clean and free of all contaminants and fully profiled and etched.
  2. Make sure that temperatures will remain between 50 and 90 degrees Fahrenheit and relative humidity to stay below 75%.
  3. Pour 1 part "B" into three parts "A" into large mixing container (we pre-measured the kits to make it easy on you!)and mix mechanically for a minimum of 3 minutes.
  4. Use a premium, de-fuzzed, phenolic core roller to roll out thin coats over workable area, making sure to maintain wet edges and backroll the entire surface.
  5. Two layers are typically suggested with any interior project receiving a polyurethane coating, with the second layer applied as soon as first coat can be walked on, and is used in the same manner as the first coat.
  6. While not necessarily required, we suggest the use of a sacrificial wax coating extend the life of the floor and add a measure of slip resistance.

澳洲10官方开奖查询

澳洲10公式

Answer: Technically yes, however, it is not suggested. For the best results, we highly recommend using two thinly applied layers. That said, Dura-Kote Polyurethane products have been known to function better than comparable sealers in situations where a single-coat interior sealer is required.

澳洲10软件

Answer: To a very slight degree, yes. It is a higher solids content coating than an acrylic sealer but is not robust enough to fill large voids.

澳洲10开奖结果时间

Answer: Polyurethane coatings are not as breathable as acrylic sealers, and therefore not used in most traditional exterior applications.

澳洲10开奖号码

Answer: Check with your local municipalities to be certain, but given its extremely low VOC rating at less than 75 grams per Liter, this product can be used in almost all states or municipalities.

澳洲10线上投注

Coverage   Approx 300-400 square foot per gallon, per coat (varies widely based on substrate porosity and application methods)
VOC Rating   less than 72 g/L
Solids Content   57%
Pot Life   approx 30 minutes
Shelf Life   1 year in original unopened container
Ready for recoat   6-8 hours (18+ hours at low temperatures)
Light Duty Use   24 hours (Up to 48 hours at low temperatures)
Heavy Traffic Ready   3 days (Up to 5 days at low temperatures)
Full Cure   5-7 days (Up to 14 days at low temperatures)
Appearance (cured)   Clear Gloss or Satin
Appearance (wet)   Milky Liquid
Water Resistance   Excellent beads water
Mechanical Stability   Excellent
Light Stability   Excellent
Diluent   Water
Odor   Sweet Acrylic
Application Temperature   50 - 90 degrees Fahrenheit

澳洲10开奖结果直播

澳洲10预测

Gasoline   no effect at 24 hrs
Diesel Fuel   no effect at 24 hrs
Kerosene   no effect at 24 hrs
Brake Fluid   softens/discolors at 24 hrs
Skydrol   dulls at 24 hrs
1 and 4 Gallon Kits Water-Based Clear Floor Polyurethane Gloss or Satin DK 400WB™ by SureCrete

1 and 4 Gallon Kits Water-Based Clear Floor Polyurethane Gloss or Satin DK 400WB™ by SureCrete 1 Gallon Kit – Water-Based Clear Floor Gloss Polyurethane DK 400WB SKU: 890902001 | UPC: 842467107935 1 Gallon Kit – Water-Based Clear Polyurethane Floor Satin Finish DK 400WB SKU: 890902002 | UPC: 842467107942 4 Gallon Kit – Water-Based Clear Floor Gloss Polyurethane DK 400WB SKU: 890902003 | UPC: 842467107959 4 Gallon Kit – Water-Based Clear Polyurethane Floor Satin Finish DK 400WB SKU: 890902004 | UPC: 842467107966 The kits above include (1) Part “A” and (1) Part “B”

澳洲10走势软件

Sheen

Gloss, Satin

Size

1 Gallon Kit, 4 Gallon Kit

澳洲10开奖结果预测

There are no reviews yet.

Be the first to review “Water-Based Clear Floor Polyurethane Gloss or Satin DK 400WB™”

Your email address will not be published.

澳洲10网上投注

What ever you project project entails, Surecrete design products has virtually unlimited solid concrete stain colors available. Through our exclusive on-demand tinting system, Surecrete can provide just about any color you can imagine. All of our colors are made to be UV stable and are manufactured to withstand the harshest weather conditions including, heavy traffic, freeze-thaw conditions, and high heat climate areas.